Shear sensitive fluids like polymers are being mixed under very gentle process conditions. Dispersing of gases and liquids in high viscous fluids are possible down to smallest droplets with very narrow size distribution.
SMX static mixing elements are available from diameter 3.2 mm up to almost every diameter. The standard material of construction is 316 stainless steel.
 |
The SMX plus is the new revolutionary generation of static mixers featuring half the pressure drop of the SMX mixer. As a result,significant cost savings can be achieved through reduced mixer and pipe diameters or by using smaller pumps. Therefore it is likely that the SMX plus mixer is going to replace the SMX mixer in the near future.
The SMX plus mixer is available in diameters of 20 mm and bigger. The standard material of construction is stainless steel 1.4404; special materials and designs are available upon request. |
Standard housings for SMX / SMX plus mixers are made according to DIN or ANSI code. Design and fabrication to other codes such as ASME or AD2000 are possible.
Customer advantages
- Excellent mixing and dispersing even with widely differing fluids viscosities
- Very short and compact designs
- Reduced product degradation due to very short residence time
- Mixing of sensitive products under minimal shear stress
- No deposits and blockages due to the excellent cross-mixing
The SMX plus mixer offers on top:
- 50 % lower pressure drop compared to a standard SMX mixer
- Cost savings through smaller mixer, piping and pumps
Ask for a quote
back